PESS 5LVP Series All in One ESS Energy Storage System | 5.12kWh / 10.24kWh / 15.36kWh / 20.48kWh | Inverter: 6KW Off Grid Solar Inverter | PV Array MPPT Voltage Range: 60VDC-450VDC | Phase: Single Phase | Input/Output Voltage: 220VAC/230VAC/240VAC | Frequency: 50Hz/60Hz
Prostar PESS 5LVP Series All in One ESS Energy Storage System is a comprehensive solution designed for off-grid applications, offering a seamless blend of energy storage and power conversion. With a 6KW off-grid solar inverter integrated into the system, it supports a pure sine wave output with a power factor of 1.0, ensuring high-quality electricity supply for connected loads. The system is available in four capacity options: 5.12kWh, 10.24kWh, 15.36kWh, and 20.48kWh, providing flexibility to accommodate different energy storage needs.
This ESS features a built-in MPPT solar charge controller capable of handling up to 120A of maximum charge, which is ideal for harnessing energy efficiently from solar panels. The high PV input voltage range of 60-500VDC allows the system to be compatible with a wide array of solar panel configurations. The system also includes a smart battery charge design that optimizes battery life, contributing to its long-term sustainability. For environments with harsh conditions, the system comes with a built-in anti-dust kit, and its dual output control allows for flexible load management, enhancing the system’s adaptability in various applications.
Features Introduction
-
Battery module: available in capacities ranging from 5.12kWh to 20.48kWh
-
6KVA off-grid solar inverter: PF = 1.0 with pure sine wave output (AC + PV hybrid feed to the load)
-
Battery cycle life: no less than 6000 cycles at 80% Depth of Discharge (DOD), 0.5C
-
Connectivity: WiFi and GPRS available for iOS and Android
-
Battery-free operation: the inverter can operate without a battery
-
Factory reset: one-key restoration to factory settings
-
Automatic activation: built-in lithium battery automatic activation
-
Built-in MPPT solar charge controller: 120A maximum charge, up to 6500W
-
High PV input voltage range: supports 60-500VDC
-
Environmental protection: built-in anti-dust kit for harsh environments
-
Smart battery charge design: optimizes battery life
-
Dual output control: flexible load management
Application Diagram

Technical Specification
| MODEL |
PESS-6K5LVP1 |
PESS-6K5LVP2 |
PESS-6K5LVP3 |
PESS-6K5LVP4 |
| Phase |
1-Phaseln/1-Phase Out |
|||
|
Maximum PV Input Power |
6500W |
|||
|
Maximum Main Output Power |
6200VA/6200W |
|||
|
Maximum Second Output Power |
6200VA/6200W |
|||
|
Maximum Total Output Power |
6200VA/6200W |
|||
|
AC Input |
||||
| Nominal Voltage |
220/230/240VAC |
|||
|
Acceptable Voltage Range |
170-280VAC;90-280VAC |
|||
|
Frequency |
50/60Hz (Auto Sensing) |
|||
|
AC Output |
||||
|
Nominal Voltage |
220/230/240VAC |
|||
|
Surge Power |
12400VA |
|||
|
Frequency |
50/60Hz |
|||
|
Waveform |
Pure Sine Wave |
|||
|
Dual Outputs |
Yes |
|||
|
Transfer Time |
10ms (For Personal Computer); 20ms (For Home Appliances) |
|||
|
Peak Efficiency |
94% |
|||
|
Overload Protection |
5s@>=140% Load;10s@100%~140% Load |
|||
|
Admissible Power Factor |
0.6-1(Inductive orCapacitive) |
|||
|
Solar Charger & AC Charger |
||||
|
Solar Charger Type |
MPPT |
|||
|
Max. PV Array Power |
6500W |
|||
|
Max. PV Array Open Circuit Voltage |
500VDC |
|||
|
PV Array MPPT Voltage Range |
60VDC-500VDC |
|||
|
Max. Solar Input Current |
1/27A |
|||
|
Max.Solar Charge Current |
120A |
|||
|
Max. AC Charge Current |
80A |
|||
|
Max. Charge Current |
120A |
|||
|
Battery |
||||
|
Rate Voltage (VDC) |
51.2 |
|||
| Cell Combination |
16S1P x 1 |
16S1P x 2 |
16S1P x 3 |
16S1P x 4 |
| Rated Capacity (Ah) |
100 |
200 |
300 |
400 |
| Energy Storage (kWh) |
5.12 |
10.24 |
15.36 |
20.48 |
| Discharge Cut-off Voltage (VDC) |
43.2 |
|||
| Charge Cut-off Voltage (VDC) |
58.4 |
|||
|
Physical |
||||
| Dimensions LxWxH (mm) |
192x640x840 |
192x640x1180 |
192x640x1520 |
192x640x1860 |
| Weight (Kg) |
64 |
113 |
162 |
211 |
