PESS C&I Series Outdoor Energy Storage System | 215kWh / 230kWh | PCS Power: 100kVA | PV Array MPPT Voltage Range: 350-1000VDC | Protection Grade: IP54
Prostar PESS C&I series outdoor energy storage system is a versatile and high-performance solution for industrial and commercial use. It features a transformer-less design with a wide AC grid voltage range, ensuring higher system efficiency and adaptability to diverse grid conditions. With a 100kVA Power Conversion System (PCS) and expandable battery capacity up to 215kWh/230kWh, it provides reliable energy storage. The system uses LiFePO4 battery technology for safety and stability, supported by intelligent thermal management and a dual – level fire extinguishing system. Its all-in-one design with modular configuration simplifies installation and maintenance, making it ideal for both on-grid and hybrid energy setups.
Features Introduction
-
Transformer-less design ensures higher system efficiency
-
Wide AC grid voltage range accommodates diverse grid conditions
-
Smart air cooling reduces energy consumption
-
Single battery string eliminates circulating current and saves battery capacity
-
Comprehensive thermal management includes fault detection and protection
-
Inbuilt BMS, PCS, MPPT, and EMS provide multiple levels of software and hardware protection
-
Dual-level fire extinguishing system enhances safety
-
Modular design with flexible configuration and small footprint
-
Power module supports “N+1” redundancy for reliable operation
-
All-in-one design enables easy installation and maintenance
Application Diagram

Technical Specification
| MODEL |
PESS-CI-100-215 |
PESS-CI-100-230 |
|
Battery Specification |
||
| Battery Type |
LiFePO4 |
|
| Cell Capacity |
3.2V/280Ah |
3.2V/300Ah |
| Cell Combination |
1P20S |
|
| Pack Qty |
12 |
|
| Rated Capacity |
215kWh |
|
| Rated Voltage |
768VDC |
|
| Voltage Range |
636-864VDC |
|
| Charge/Discharge Rate |
0.5C Rated |
|
| DOD (Depth of Discharge) |
95% |
|
| Cooling System |
Air Cooling |
|
| Fire Fighting System |
Two Level Protection: Standard: Aerosol + HFC-227ea. Optional: PERFLUORACE |
|
|
AC Specifications |
||
| Rated Voltage |
400VAC |
|
| Voltage Range |
320VAC-400VAC |
|
| Frequency Range |
50/60±2.5Hz (self-adaption) |
|
| Grid System |
3P+N+PE |
|
| Isolation Transformer |
No |
|
| Rated Power |
100kW |
|
| Peak Power |
110kW |
|
| Rated Current |
144A |
|
| Overload Capacity |
≤110% Continues Running, ≤120% 1 Min |
|
| Power Factor |
-0.99~+0.99 |
|
| On Grid THDI/THDW (Off grid) |
3%, Full load |
|
| STS Module Power Capacity |
200kW |
|
| Transfer Time (On-off Grid) |
≤20ms |
|
|
PV Specification |
||
| Max. PV Input Voltage |
1000VDC |
|
| Max. PV Input Power |
110kW |
|
| No. of MPPT/String per MPPT |
2/1 |
|
| MPPT Voltage Range |
350-1000VDC |
|
| MPPT Current |
200A (100A/100A) |
|
| MPPT Efficiency |
99% |
|
|
System Specification |
||
| Temperature Range |
-25~65°C, >45°C Power Derating |
|
| Storage Temperature |
-40~75°C |
|
| Noise |
<70dB |
|
| Dimension (WxDxH) |
1800x1250x2000mm |
|
| Weight |
2600Kg |
|
| Protection Grade |
IP54 |
|
| Cooling Type |
Industry level Air Conditional |
|
| EMS |
Manual Mode, Peak Saving, Virtual Enlargement, New Energy Power Absorption, Anti-Reverse Flow Mode. Support for Remote Management and Control |
|
| Communication Protocol |
Modbus RTU, Modbus TCP, IEC104, MQTT, Etc. |
|
| Communication Port |
RS485/RJ45/4G/WIFI/DIDO |
|
